Robust Home Rhombus Shape Door Rail Sliding Door System Track Hardware Fitting Set For Wooden Sliding Door

Robust Home Rhombus Shape Door Rail Sliding Door System Track Hardware Fitting Set For Wooden Sliding Door
  • Продавецbetances.us
  • Список ценUS $60.53piece
  • Продажная ценаUS $60.53piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,4 (659)

Oписание продукта

Terminal indicator light:
 
Terminal equipment have red and blue light.In the equipment when the power is on, terminal equipment of red will bright lights more than ten seconds,and then into the flash every two seconds to said equipment.The red light flashing rapidly said terminal equipment is communication.Blue lights flash two seconds said a GPS module in standby, the blue light has not bright, said the GPS module in the work, but I haven\'t, to locate the blue light has been bright, said the GPS module in work, and positioning.
213745
Terminal main functions:
 
A, locating and tracking through the platform or cell phone to always positioning of terminal equipment, equipment running status.Positioning platform according to the requirement of customers.
 
B, triggered emergency alarm: when installing a terminal equipment of the vehicle in an emergency, call the police for help. 
 
C, remote controlling oil and circuit: anytime, anywhere via text message control equipped with terminal equipment of the oil and circuit of the vehicle.
 
D, remote monitoring: the calling terminal equipment of the mobile phone number, after connect can be anywhere at any time to monitor terminal equipment within the scope of 5 meters around the sound.
 
E, movement alarm: through mobile phone text messaging to the device, start the movement alarm function.Installed with terminal equipment will send text messages to inform the vehicle motion.
 
F,overspeed alarm: through mobile phone text messaging to the device, start the overspeed alarm function.Equipped with terminal equipment of the vehicle speed exceeds the speed of the set will send text messages to inform.
 
G, electronic fence: through the platform to start the electronic fence.Installed with terminal equipment will alarm when a vehicle is beyond the limits to the platform.
 
H, mobile phone to get the dimensions: through mobile phones can obtain installation location of the vehicle by the dimensions of the equipment.
 
I, mobile access location: via their mobile phones to send instructions to the equipment, equipment to return to the position of the equipment, which features should be platform support.
 
J, remote start system: through mobile phone text messaging for terminal equipment to restart.
 
K, establishment of interval: by mobile phone set the interval of data transmission platform.Also transfer interval can be set through the platform, according to the platform whether to support this feature.
 
L, mileage statistics, the ACC detection function, the power outage alarm function.
 
M, compatible with the original car alarms.After the car alarm alarm equipment and alarm, through text messages notify the owner.
 
N, remote modify IP address and port functions.
 
Terminal function Settings:
 
 
A, set up an administrator
 
Device has two operating modes, one is administrator mode, another kind is no administrator mode.In the administrator mode, the operation of equipment only authorized number can be.When there is no administrator mode, all Numbers can be for operating equipment.Equipment by default for the "administrator mode".
 
The status of the equipment is set to have administrator to send this message to the device:
 
The administrator of 123456
 
Texting number becomes administrator number."Administrator" as the instruction, "123456" for the device password.Equipment from the administrator to no administrator state method to delete the administrator use administrator mobile phone number.
 
 
 
B, add the number
 
In administrator mode, use the administrator number send text messages to the device to add other number below.
 
Add the number 123456 123456
 
"Add number" as the instruction, "123456" for the device password, "13612345678" to add the number.This instruction is only administrators can number operation.In the absence of setting the administrator this instruction is invalid.
 
 
 
C, delete number
 
In administrator mode, use the administrator number send text messages to the device to delete below number.
 
Delete number 123456 123456
 
"Delete number" as the instruction, "123456" for the device password, "13612345678" to delete the number.This instruction is only administrators can number operation.Administrator to delete your number, the equipment is returned the administrator mode, and automatically remove the other number.
 
 
 
D, change the password
 
Send text messages to the device to modify the password below.
 
Change the password, 123456, 168168
 
"Change password" as the instruction, "123456" for the equipment of old password, "123456" for the equipment of new password.Password must be 6 digits.Equipment initial password is 123456.In the condition of administrator, this instruction is only administrators can number operation.In the condition of no administrator, all Numbers can be manipulated.
 
 
 
E, oil control,
 
By SMS to install equipment of vehicle oil control.To disconnect the vehicle oil line, send the following message to the device.
 
Oil cut-off 123456
 
Oil "break" as the instruction, "123456" for the password.Send to closed oil circuit, the following message to the device.
 
Oil supply 123456
 
"Oil" as the instruction, "123456" for the password.In the condition of administrator, as long as the number can only be set operation, in the condition of no administrator, all Numbers can be manipulated.
 
 
 
F, circuit control
 
Through text messages to install equipment circuit to control the vehicle.Send to disconnect the vehicle circuit, the following message to the device.
 
Power is 123456
 
"Electric oil" as the instruction, "123456" for the password.Send to closed circuit, the following message to the device.
 
The power supply of 123456
 
"Oil" as the instruction, "123456" for the password.In administrator mode, only can set the number of operations, in the condition of no administrator, all Numbers can be manipulated.
 
 
 
G, listening devices
 
Can monitor terminal number.Listening has three models: 1) any listening: "any listening" to the device, to return
 
"Set up any monitor success."After all Numbers can be listening in.Equipment the default mode for this 2) limit listening: "limit listening" to the device, returns "set limit to monitor success."Authorization number can listen, after this function need equipment in card number opened for our call screening function.3) close listening: hair "closed listening" to the device, the device returns "close to monitor success."After all the Numbers are not listening.
 
H, movement alarm
 
Send through the following message to the device and start the movement alarm function.
 
Movement alarm
 
Alarm "movement" as the instruction, the instruction don\'t need a password.Set up after a successful equipment will return a text message, content is: the movement alarm "success".When start the function, at the time of vehicle movement will send a message to set up the phone, prompt vehicle movement."This function must be at the time of GPS signal is valid".Cancel the movement send alarm function for the following message to the device.
 
Cancel the movement alarm
 
"Cancel motion alarm" as the instruction, the instruction don\'t need a password.In the condition of administrator, only can set the number of operating this functionality.In the condition of no administrator, all Numbers can operate this function.
I, overspeed alarm
 
 
Send through the following message to the device and start the overspeed alarm function.
 
 
Overspeed alarm 80
 
 
"Overspeed alarm" as the instruction, "80" is the speed limit is 80 km/h, this instruction does not require a password.Set up after a successful equipment will return a text message, the content as follows: "overspeed alarm success".When start the function, the vehicle motion faster than the speed of the set, will send a message to set up the phone, prompt vehicles have been speeding."This function must be at the time of GPS signal is valid".Cancel the overspeed alarm functions on the device to send the following messages.
 
 
Cancel the overspeed alarm
 
 
"Cancel overspeed alarm" as the instruction, the instruction don\'t need a password.In the condition of administrator, only can set the number of operating this functionality.In the condition of no administrator, all Numbers can operate this function.
 
 
 
 
 
 
J, mobile phone for the dimension
 
 
To install equipment for vehicles through the current dimension.Send through the following message to the device.
 
 
Mobile phone positioning
 
 
"Mobile phone positioning" as the instruction, the instruction don\'t need a password.Equipment in the condition of no administrator, any number can be sent to this instruction.Equipment in administrator mode, only authorized number can get position.
 
 
 
 
 
 
K, set the device number
 
 
Set up a platform, with the binding to use platform, according to the specific platform.Set the method for sending the following content on the device.
 
 
Equipment number 13612345678
 
 
"Equipment number" as the instruction, "13612345678" for the 11 cell phone number, must be 11 Numbers.Is the equipment inside the card number.
 
 
L, restart the system
 
 
Via their mobile phones to send the following to the terminal number, terminal equipment to restart.
 
 
Restart the system 123456
 
 
"To restart the system" as the instruction, "123456" for the password.After restart the system, equipment will be returned to oil supply, power supply condition.
 
 
 
 
 
 
M, set the transmission interval
 
 
By mobile phone Settings, the interval of data terminal equipment back to the platform.Send the following content to the terminal number,
 
 
Positioning interval number 30 0
 
 
"Positioning interval" as the instruction, "30" for the interval of data sent to the platform, said 30 seconds a data to the platform, must be greater than 10 seconds."Times" as the instruction, the number of "0" said transmission infinite number of times.To cancel the transfer can send the content to the device number on below,
 
 
Cancel the positioning
 
 
Equipment will cease to transmit data to the platform.This function also can be realized through the platform, according to the concrete platform support this feature.
 
 
 
 
 
 
N, restore the initial password
 
 
When forget device password, the device can send messages back to the initial password.Send text messages to the device number on below,
 
 
Restore the initial password
 
 
"Return to initial password" for the instruction.Under the condition of no administrator, all Numbers can be operating time function, with the help the administrator, only the administrator can operate the function.Equipment initial password as "123456".
 
 
 
 
 
 
O, modify IP address and port
 
 
Can modify the IP address and port of the terminal equipment, the equipment transfer data to another platform.Send text messages to a terminal number below,
 
 
Address 123.67.87.9 port 344
 
 
"Address" as the instruction, "123.67.87.9" is the IP address, "port" as the instruction, "344" for the port number.
 
 
 
 
 
 
P, set up the ACC, transmission interval
 
 
You can set the ACC open and close of transmitting data interval.To set up the open interval transmit data at the time of ACC
 
 
The ACC development interval of 30
 
 
Said the ACC open when 30 seconds to pass data to the platform at a time.To set up the closed interval transmit data at the time of ACC
 
 
The ACC send interval 60
 
 
Said the ACC closed 60 seconds when a data transfer to the platform.
 
 
 
 
 
 
Q, mobile phone access terminal location
 
 
Can get terminal location through mobile phone text messaging.To get the terminal location
 
 
To obtain position
 
 
Where equipment will be returned.
Terminal equipment installation:
 
 
 
General GPS138 on-board equipment installation of professional and technical personnel needed by the local auto repair service points for installation.Without the consent of the company, the user may not arbitrarily disassembling or repairing, otherwise the consequence is proud.When install the GPS antenna put the location of the top cannot have a metal block, the GSM antenna as far as possible don\'t stand too close to the metal.
8
 
 
Installation steps:
 
 
 
1, first pick a GPS antenna and GSM antenna, pay attention to the two antenna can\'t wrong, otherwise can\'t work normally, square for the GPS antenna, T for GSM antenna.Put the phone card in card slot, are oriented toward the metal, and then inserted into the device, the device has a backup battery, external power supply can work a few hours!Equipment boot after the red light is flashing, equipment positioning to the blue light is normally on, after the red light and blue light in the same hole.
 
 
 
2, such as equipment after boot and locate to plug in the power cord, red battery anode, black connect the cathode, to pick up on the often electricity, is the equipment after the car should also be supplied with electricity.
 
 
 
3, meet an emergency alarm button, the blue line alarm line of red, black line after alarm line of black.Alarm button is not required to install, the user can according to your own need to decide whether to install.
 
 
 
4, installation oil and electricity equipment can support off oil and electricity at the same time, in a general pick off oil, or electricity.Off oil, or electricity needed relay, relay with 4 wires or 5 lines, five lines of a root without specific connection wiring diagram for reference.Off oil, or electricity is not required, the user can according to your own need to decide whether to install.
 
 
 
5, if the car has a burglar alarm, pink detection alarm line connects to the anode of the alarm horn, when the speaker alarm device will alarm notifies the user at the same time.
 
 
 
Line 6, the custom can detect the high and low level, and the state to send to the server, the user can according to need to define the meaning of this line represents.
Scope of application:
 
 
 
A, car rental companies, outdoor equipment special security system
 
 
 
B, financial insurance industry of location tracking system
 
 
 
C, a variety of command and control system of the vehicle industry
 
 
 
D, large and medium-sized engineering device used in vehicles
 
 
 
E, logistics, cargo tracking
 
 
 
GPS tracker, accurate positioning, set security, positioning, monitoring, alarm, first aid and tracking function and the integration of product, used for car alarm.
And fully support the terminal SMS/GPRS/Internet data transmission function, and make it more widely used in the team\'s cluster monitoring, emergency scheduling, location-based services, traffic safety management, and other fields.
 
 
 
Detailing:
Based on GSM/GPRS (850/900/1800/1900 MHZ) wireless communication network and GPS satellite positioning system, a number of ways to implement tracking, free provides the monitoring center software, global coverage maps, computer real-time tracking;Mobile phone map query;GOOGLE EARTH to track.
Product advantage
Tiny size, size: 54 mm * 62 mm * 26 mm, weight 120 grams, easy to hide.                      
Support under the condition of no positioning server location: can inquire the real-time latitude and longitude/time/speed, using public map software, enter the coordinates by manual can query the real-time location information
Pieces if you\'re trying to query target into the blind area, underground parking lot or other GPS tracker will report to you target was finally locate the position of the information.
Pieces of remote power cut-off
Mixer timing time tracking function.
Add/remove features pieces authorization number.
Pieces have hidden alarm function.
Electronic fence, to set a fixed area, beyond the fixed area or call the police.
An electric power outage alarm in pieces.
Mixer alarm door open
Pieces of illegal fire alarm
Shift alarm: when the vehicle stop can be fortified, once they are shifting to authorization number with alarm.
Overspeed alarm: can be set by monitoring the target in a certain speed, more than this speed can call the police.
Pieces of low electric alarm function.
Mixer vehicle status query
Optional features:
Mixer vibration alarm
Application direction
Team/logistics/taxi rental business
 
Channel number: parallel 20 channels
Sensitivity: - 159 DBM
Accuracy: 5 meters
Positioning time: cold start/hot start 35/1 of a second time
6

I.PAYMENT                                     

1)There are many payment methods available alipay,credit cards,real-time bank transfers,
offline payments (bank transfer and Western union).
you can choose a method wcich is the most convenient for you .To protect your interests,
your payment will be temporarily held by aliexpress,
and will not be released to us until you receive your order and are satisfied with it.
 
2)Please make sure you read the entire description and agree to the transaction before buying.
 
3)Please pay within 3 days of order.
II.SHIPPING
 
CHINA POST AIR MAIL:
 
The delivery time are usually take longer time than other delivery ways.And  if you goods have been missed or damaged,please contact us .
 
 
 
CARRIER ESTIMATED TIME TRACKING LINK
China Post Air Mail 40-60 working days www.ems.com.cn/english.html
                                                       
 
 
SF 10-20 working days www.sf.com
NOTE:The dispatch time don\'t include the processing time(10days).In rare cases,your shipment may take longer time to arrive due to the delay in custom clearance and public holidays.                                       
 
note:Shipping Fee
1. If the seller has set Buyer Pays Return Shipping, you should pay for the return shipping fee directly by yourself.
2. If the seller has set Seller Pays Return Shipping, you can communicate with seller in advance about the payment method and return logistics method.
3. About the shipping fee of sending the goods, if it’s “free shipping”, then seller pays the fee and buyer can get full refund while sending back the original goods; if buyer pays the shipping fee, then buyer can only get refund of the product price.
 
 
III.Return Policy
We accept returns for replacement or refund within 7 days after receipt of item(s). Items MUST be in their original condition, not worn or altered.
If there is any problem when you receive your parcel, please contact us without hesitate in 3 days. If you are not
100% satisfied with your purchase, simply return the unworn item within 30 days of the item(s) ship date and we
will gladly exchange, or you can get wholly refund . include shipping cost ,
if you want return item. Please contact us to get a items number befroe sending out your exchange. Goods without itemnumber will NOT be accepted.
IV.feedback
Your feedback is crucial to our business and is the key to our success.
In order to reward our consistently efforts of providing excellent customer service, please kindly rate our feedback performance with high ratings in these 4 specific aspects: item as described, communication, shipping time, and shipping and handling charges.
Our auction provider will automatically leave the feedback for you after we receive yours,
Free exchange or resend,if it was damaged or lost on shiping way.
Please don\'t leave negative or neutral feedbcak,if any problem with my product,
please contact us first,i am sure everything could be solved by communication
Thank you very much for your cooperation in advance, we will consistently provide selective quality pearl Jewelry, better customer service and we will list more items with amazing low price.
V.Services
Your Satisfaction is our ultimate Goal !
Contact us : For product, technical, billing, shipping, invoice, and payment questions please contact us.We will do our best to reply your message within 12 hour